FRY Now I need help … LOL
- This topic has 8 replies, 4 voices, and was last updated 17 years, 5 months ago by
.
-
Posts
-
well what a suprise I got today while I was watching my galaxy (cpd’s), Looking around checking everything was ok when somthing caught my eye at the top (allready on the fry side of the tank passed the divider) slow current must have took the fry pass the divider wall and I can see (just) around 7 fry
Now need do my homework on raising the fry, so any tips hints etc please
I have put 2 drops of liquifry 1 in but not sure how much and how often !!
its a 50 litre tank with around a third sectioned of for fry?HELP thanks
Symmo
on the instructions it says to put liquifry in 2 times a day at 1 drop per 4 litres.
so 50 /(divide) 4 =
about 13 drops twice a day
(im assuming by what you say youhave a divider so will have to feed the whole tank in my opinion)
why do you feed your liquifry?
chris
@chr15_8 wrote:
why do you feed your liquifry?
chris
What should I be feeding them then? Any advice appreciated.
@atlantis_child wrote:
And of course, congrads for getting fry!
Thanks and oh “HOW”
well I just drop a drop or two from a few mm above the water and let it fizz on top of the water! it stays pretty still and in the right area for the fry!
so I hope this is ok?symmo
Bit fiddly but the best way is to mix the liqui fry with a bit of tank water in a cup, use a syringe or pipete and mix it well, then just squirt it into your tank.
@ste12000 wrote:
Bit fiddly but the best way is to mix the liqui fry with a bit of tank water in a cup, use a syringe or pipete and mix it well, then just squirt it into your tank.
Thanks. Have tried it this way and is much better – no film on the top of the water. Cheers guys.
@chr15_8 wrote:
sorry for any confusion i meant ‘how’
:oops:
Symmo
- You must be logged in to reply to this topic.